Home > PRODUCTS
Ore Ball Mill

Ore Ball Mill

Ore ball mill is used to separate and screening different ore minerals, separate ore tailing. It also be used for ore grinding, non-ferrous metal beneficiation, new-type building material producing.

Overview

Ore ball mill is used to separate and screening different ore minerals, separate ore tailing. It also be used for ore grinding, non-ferrous metal beneficiation, new-type building material producing.
According to the discharge method, the ball mill divided to dry-type mill and wet-type mill.
Ball mill in Zambia
After signing the contract, our engineers tested the sample, and finally recommended the best process.
Species: barite
Capacity: 500t/d
Process: two stages one close-circuit crushing, one stage one-circuit grinding and classification, one roughing-two scavenging-ten cleaning.
Structure:
Ore Ball mill is mainly consisting of feeding device, big gear, discharge device, cylinder, diaphragm plate, hollow shaft, liner, drive device and other components.
1. The feeding device is consisting of inlet chute and screw. There are liners in the inlet chute, which can extend the working life of the feeding device.
2. There is pre-gap on the inlet hallow shaft, that can reduce the tolerance which is made of temperature changes and installation mistake to ensure the gear mesh.
3. Inside the ball mill, different parts have different liner structure, which will greatly improve the grinding efficiency.
4. Dry-type ball mill adopt sliding bearing, which is good of strength, ductility, antifriction, abrasion resistance, lubricity and thermal conductivity. It is able to meet the lubrication requirements of the hollow shaft. That is suitable for the environment of low speed and heavy load in metallurgical & ore dressing industry.
5. Wet-type ball mill adopt roller bearing, reduce useless work consumption and easy to replace.

Features

1. High grinding efficiency, low consumption
2. Product fineness is adjustable and uniform.
3. Low energy consumption, low wear, low operating costs.
4. Small vibration, low noise, environmental friendly
5. Liner is made of high-quality wear resistant material with high strength, wear resistance and long working life.

Parameter

Model

(mm)

Rotation

(r/min)

Ball load

(t)

Feed size

(mm)

Discharge size

(mm)

Capacity

(t/h)

Power

(kW)

Weight

(t)

Remark

Φ750×750

40.56

0.5

≦20

0.074-0.3

0.18-0.5

15

2.774

Energy-saving

Φ900×3000

36

2.7

≦20

0.074-0.89

1.1-3.5

22

6.8

Dry-type

Φ900×3000

39

5.8

≦25

0.075-089

0.8-3.1

22

7.1

Wet grid type

Φ1200×4500

33

13

≦25

0.074-0.4

0.7-8

45

14.2

Wet grid type

Φ1500×5700

30

25

≦25

0.074-0.6

4-14

130

25

Wet grid type

Φ1830×6400

24.1

21

≦25

0.074-0.4

6.5-15

210

34

Wet over-flow


If you are interested in our products, Please get in contact with us .

MESSAGE

  • Rod mill

    Rod mill

  • Ore Ball Mill

    Ore Ball Mill

  • Powder grinding plant

    Powder grinding plant

  • Slag Ball Mill

    Slag Ball Mill

  • Cone Ball Mill

    Cone Ball Mill

Wechat:+86 18937185591

Please press to copy the number,then pasete it to chat