are used for the lead oxide and a variety of stone and other materials or to mines. Ball mills are widely used in construction materials, chemicals and other fields. There are two types of grinding: dry and wet methods. The ball mill can be divided into plate type and flow type according to different forms of discharge.
Lead oxide ball mill structure
The lead oxide ball mil
l is composed of feeding part, discharging part, rotating part, transmission part (reducer, small transmission gear, generator, electrical control) and so on.
Lead oxide ball mill features
Hollow shafts can be replaced with cast steel and lining, and the rotating gearwheel process is used to cast the rolling gear. The barrel is a wearable well with a wearable scale plate. The machine is stable and reliable.
The working principle of the lead oxide ball mill: This ball mill is a horizontal and tubular running device with two warehouses. The machine is in a grid format with its outside running along the gear. The material enters the first warehouse of the milling machine helically and evenly along the hollow axis of the input material by the input material means. In this warehouse, there are trapezoidal scale plates or corrugated scale plates. When the barrel rotates and then centrifugal force is generated, different sizes of steel balls are mounted on the scale plate. At the same time, the ball was brought to a certain height and dropped, and the material was ground and hit. After rough grinding in the first warehouse, the material enters the second warehouse and is reground with steel balls and weighing pans. Finally, the powder is discharged through the output material plate and the final product is completed.